Panerai Luminor Marina 1950 3 Days Chrono Flyback PAM00524 with flyback timing, self-winding movement with up to three days of power reserve. The movement used in the watch was independently developed by Panerai. It is also the first watch made with the P.9100 movement, so this watch has an extraordinary significance. The watch has a diameter of 44 mm. This size is suitable for men who prefer a large dial. The case is made of AISI 316L matte steel. The surface is brushed with metal. It is very textured and also highlights the high-end craftsmanship of brand watchmaking..Replica Panerai Luminor Marina 1950
The dial structure is designed by Panerai in the late 1930s. It consists of two overlapping thin plates. The upper sheet is hollowed out at the corresponding time scale. This makes the scale with the luminous coating on the bottom layer better. The light is emitted, and the time can be clearly read even under extremely weak light. The design of the chronograph hands of the watch is also unique. The second hand is distinguished by a dazzling blue color, which complements the design of the black dial. The 3 o'clock position has a date display window, while the 9 o'clock position has a small seconds disc.
The crown design of the Panerai watch is unique. The crown protection device consists of a semi-circular bridge with a moving protection lever. When the protection rod is in the closed position, it presses the crown to form a good seal. Prevent water from flowing into the movement. Compared to the Luminor, the Luminor 1950 uses a unique crown bridge, but the Luminor 1950 is made in a more detailed manner, engraving a LOGO symbolizing the quality of the watch on the brushed steel surface.
The back of the case features a 12-sided case back, and the built-in self-made P.9100 movement is visible through the central sapphire crystal window. The P.9100 is the first self-winding movement with timing function developed by Panerai. It is completely developed and produced by Panerai's watchmaking factory in Nosit. Its materials and process standards are technical and quality. And the highest level of reliability and other aspects. The movement is 31 mm in diameter and 8.15 mm thick and contains 37 stones and 302 components. The two barrels are connected to provide 72 hours of power reserve, which is equivalent to three days. The two-way rotating oscillating weight realizes self-winding. The balance balance that vibrates 28,800 times per hour is supported by a single-plate bridge with anti-shock device. The outer edge of the balance wheel is equipped with four square-head screws. Adjust the four screws to move the time. The rate is adjusted. This movement design highlights the Italian style, simple but not simple.http://www.wristwatchline.co/
The dial structure is designed by Panerai in the late 1930s. It consists of two overlapping thin plates. The upper sheet is hollowed out at the corresponding time scale. This makes the scale with the luminous coating on the bottom layer better. The light is emitted, and the time can be clearly read even under extremely weak light. The design of the chronograph hands of the watch is also unique. The second hand is distinguished by a dazzling blue color, which complements the design of the black dial. The 3 o'clock position has a date display window, while the 9 o'clock position has a small seconds disc.
The crown design of the Panerai watch is unique. The crown protection device consists of a semi-circular bridge with a moving protection lever. When the protection rod is in the closed position, it presses the crown to form a good seal. Prevent water from flowing into the movement. Compared to the Luminor, the Luminor 1950 uses a unique crown bridge, but the Luminor 1950 is made in a more detailed manner, engraving a LOGO symbolizing the quality of the watch on the brushed steel surface.
The back of the case features a 12-sided case back, and the built-in self-made P.9100 movement is visible through the central sapphire crystal window. The P.9100 is the first self-winding movement with timing function developed by Panerai. It is completely developed and produced by Panerai's watchmaking factory in Nosit. Its materials and process standards are technical and quality. And the highest level of reliability and other aspects. The movement is 31 mm in diameter and 8.15 mm thick and contains 37 stones and 302 components. The two barrels are connected to provide 72 hours of power reserve, which is equivalent to three days. The two-way rotating oscillating weight realizes self-winding. The balance balance that vibrates 28,800 times per hour is supported by a single-plate bridge with anti-shock device. The outer edge of the balance wheel is equipped with four square-head screws. Adjust the four screws to move the time. The rate is adjusted. This movement design highlights the Italian style, simple but not simple.http://www.wristwatchline.co/
No comments:
Post a Comment